Endress+Hauser Proline Cubemass C 100 PROFIBUS DP Operating Instructions Manual page 122

Technical data
Remote operation
Service interface
122
For some work performed on the measuring device (e.g. electrical connection), it is
advisable to disconnect the local display from the main electronics module:
1. Press in the side latches of the local display.
2. Remove the local display from the main electronics module. Pay attention to the
length of the connecting cable when doing so.
Once the work is completed, plug the local display back on.
Via PROFIBUS DP network
This communication interface is available in device versions with PROFIBUS DP.
 20 Options for remote operation via PROFIBUS DP network
1 Automation system
2 Computer with PROFIBUS network card
3 PROFIBUS DP network
4 Measuring device
Via service interface (CDI-RJ45)
PROFIBUS DP
2
3
 21 Connection for order code for "Output", option L: PROFIBUS DP
1 Service interface (CDI -RJ45) of the measuring device with access to the integrated Web server
2 Computer with Web browser (e.g. Internet Explorer) for accessing the integrated device Web server or with
"FieldCare" operating tool with COM DTM "CDI Communication TCP/IP"
3 Standard Ethernet connecting cable with RJ45 plug
Proline Cubemass C 100 PROFIBUS DP
1
4 4
2
3
4
1
Endress+Hauser
A0020903
A0021270