Special Paper Size Selection For The 1St Tray - Ricoh FT5535 Service Manual

4. Select the required SP setting with the numeric keys (see Service Tables
- Paper Size Settings), then press the "Enter" key.
NOTE: If you input the wrong setting by mistake, you can cancel it by
pressing the "Clear/Stop" key before pressing the "Enter" key.
5. Leave SP mode by pressing the "Clear Modes" key three times.

2.3.4 Special Paper Size Selection for the 1st Tray

⇒
For the 1st tray, a wider range of paper sizes can be selected using
SP5-019-007 for A153, A156, A157, A160, A161, A162 and A204, A208,
A211, A212 and A214 copiers, or SP5-019-008 for A155 and A159, A206
and A210 copiers.
NOTE: The definition of the 1st tray differs with the type of copier. See
section 2.3.1 "Paper Feed Station Definition".
If a special paper size is selected, the machine ignores the paper size set
with the paper size slider.
See Service Tables - Paper Size Settings for how to select a special paper
size using SP5-019.
A156/A160/A162
CÓPIA NÃO CONTROLADA
3-16
CÓPIA NÃO CONTROLADA
Rev. 08/2001
FSM