Ricoh FT5535 Service Manual page 531

7. Transfer Belt Unit
(every 120 k)
Replace the transfer
belt (every 240 k).
8. Fusing Unit
(every 120 k)
Replace the
pressure roller
(every 240 k for
A208/A210/A211
copier only).
9. Duplex Tray
(every 120 k)
10. Rear of the machine
(every 120 k)
SM
CÓPIA NÃO CONTROLADA
PREVENTIVE MAINTENANCE SCHEDULE
1. Remove the transfer belt and clean the used
toner tank with a blower brush or vacuum
cleaner.
2. Clean the transfer belt.
3. Replace the transfer belt cleaning blade.
1. Clean the entrance and exit guide plates
2. Inspect the thermistor, fusing lamps, hot and
pressure roller bearings, antistatic brush, and
cleaning roller bushings and oil supply roller
one-way bushing.
3. Clean the pressure roller, cleaning roller, exit
roller, and turn gate transport rollers.
4. Replace the hot roller strippers.
5. Replace the hot roller. Lubricate the flange
with Grease Barrierta JFE 55/2.
6. Replace the pressure roller (A204/A206/A207
copiers only).
7. Replace the cleaning roller.
8. Replace the oil supply roller and cleaning
brush (A204/A206/A207 copiers only).
1. Inspect the mylars.
2. Replace the feed roller and the bottom plate
pad.
3. Lubricate the clutch spring with Mobil Temp 78.
1. Inspect the timing belts.
1-99
CÓPIA NÃO CONTROLADA
A207/A208/A211