Ricoh FT5535 Service Manual page 484

INSTALLATION
–A204/A206/A207 copiers–
[C]
[A]
–A204/A206/A207 copiers–
[D]
[D]
4. Remove the two M4 x 8 round head screws [A] from the left cover of the
copier.
5. Install the front connecting bracket [B] (2 screws M4 x 12) and the rear
connecting bracket [C] (2 screws M4 x 12) on the copier.
6. Attach the entrance guide mylar [D] to the copier exit area, as shown.
NOTE: 1) The entrance guide mylar differs depending on the model.
2) Align the edge [E] of the cover and the mylar.
A207/A208/A211
CÓPIA NÃO CONTROLADA
–A208/A210/A211 copiers–
[B]
[C]
[A]
A664I503.wmf
–A208/A210/A211 copiers–
[E]
A664I505.wmf
1-52
CÓPIA NÃO CONTROLADA
A664I504.wmf
[D]
[D]
A664I506.wmf
[B]
[E]
SM