Ricoh FT5535 Service Manual page 319

Rev. 7/95
4. SERVICE TABLES
4.1 DIP SWITCHES
DIP SW 101
1 2 3 4
Off Off On On Off Off Off Off Standard Factory Setting
Off - - -
On - - -
- On Off -
- Off On -
- - - Off On
- - - On Off
- - - On On
- - - -
- - - -
Do not touch dip switches 1 to 5.
How to do a free run
1. Select either mode 1 or mode 2 with dip switches 6 and 7.
2. Turn off the power, disconnect the optical cable, and turn on the power.
3. Press SW101 on the PCB to start the free run.
4. When you wish to stop the free run, press SW102 on the PCB, then
reset the dip switches to their default settings.
Free Run Mode 1
The paper feed operation performs up to 20 times for each paper feed
station.
(10 s)
1st feed station
Repeat
Repeat
Free Run Mode 2
The paper feed operation can be checked for the selected paper feed station.
A156/A160/A162
CÓPIA NÃO CONTROLADA
5 6 7 8
- - - - Speed in the free run mode: 200 mm/s
- - - - Speed in the free run mode: 150 mm/s
- - - - Bank type : 500 sheet type
- - - - Bank type : 250 sheet type
Normal Operation / Free Run Mode 1*:
-
- - One paper feed tray type
Free Run Mode 2*: Paper feed tray 1 only
Normal Operation / Free Run Mode 1*:
-
- -
Two paper feed tray type
Free Run Mode 2*: Paper feed tray 2 only
Normal Operation / Free Run Mode 1*:
-
- -
Three paper feed tray type
Free Run Mode 2*: Paper feed tray 3 only
- On Off - Free Run Mode 2
- On On - Free Run Mode 1
2nd feed station
Two paper feed tray type
9-8
CÓPIA NÃO CONTROLADA
Function
(10 s)
3rd feed station
Three paper feed tray type
(10 s)
FSM