Ricoh FT5535 Service Manual page 110

Mode No.
•
°5-101 Auto Reset
Time Setting †
•
°5-102 Auto Energy
Saver Time
Setting †
•
°5-103 Auto Tray Shift
†
°5-104 A3/DLT Double
Count †
•
°5-105-002 Fuser temp †
•
°5-106 Image Density
Level
Correction
(ADS
Correction) †
•
°5-107-001 Image Shift
to Margin
5-107-002 Adjustment †
•
°5-108 Edge Erase
Margin
Adjustment †
FSM
CÓPIA NÃO CONTROLADA
Function
Inputs the auto reset time after the copier
enters standby, or disables auto reset.
(1 second per step [Range: 1 ~ 999])
If "0" is selected, auto reset is disabled.
Sets the time that the machine enters
energy saver mode after entering the
ready condition,
Selects whether auto tray shift is on or
off.
Specifies whether the counter is doubled
for A3/DLT paper.
If "ON" is selected, the total counter and
the current user code counter counts up
twice when A3/DLT copy paper is used.
Fuser temperature can be selected in
energy saver mode
Selects the image density level
correction.
The development bias voltage correction
in ADS mode depends on this setting
(see "ADS Correction" in the Process
Control section for details).
This controls the margin width
adjustment for the Left and Right margin
adjustment keys.
SP5-107-001: Left
SP5-107-002: Right
SP5-908 must be at 2 for this to have
any effect; this changes the function of
the Erase key to a Margin Adjustment
key.
(A4 version: 1 mm per step [Range: 0
mm to 15 mm],
LT version: 0.01" per step [Range: 0" to
0.60"])
Adjusts the edge erase margin width in
erase edge mode.
SP5-908 must be at 1 for this to have
any effect. A strip of the selected width
will be erased around the edges of the
copy image.
4-29
CÓPIA NÃO CONTROLADA
Rev. 1/26/96
Settings
0 ~ 999
Default = 60
1 ~ 120 minutes
(1minute per step)
(Default: 15
minutes)
0: OFF
1: ON
0: OFF
1: ON
SP Type 1 Type 2
Data
175 ° C 175 ° C
0
160 ° C 150 ° C
1
145 ° C 125 ° C
2
130 ° C 100 ° C
3
115 ° C 75 ° C
4
95 ° C
5 -
Default
2: (145 ° C) :FT5035/5535
2: (125 ° C) :FT4027/4527
3: (100 ° C) :FT4022/4522
0: Dark
1: Normal
2: Light
A4 version
0 ~ 15
Default = 5
LT version
0 ~ 0.60
Default = 0.20
A4 version
1: 5 mm
2: 10 mm
LT version
1: 0.20"
2: 0.40"
A156/A160/A162