Ricoh FT5535 Service Manual page 371

[A]
[C]
10. Open the front door [A] of the sorter stapler and swing the staple unit [B]
up.
11. Remove the green plastic clip [C] from the staple cartridge and correct
the position of the staple sheet [D] to make it flush with the other sheets
in the cartridge.
12. Install the cartridge [E] in the stapler while holding the staple unit.
13. Put the staple unit back to the original position, close the sorter stapler
front door, and plug in the copier.
14. Turn on the main switch, and test the operation of the sorter stapler.
NOTE: The stapler will not be stapling for the first 5 or so copies after
installation until the first staple comes to the proper position from
the cartridge.
A156/A160/A162
CÓPIA NÃO CONTROLADA
[B]
[D]
11-10
CÓPIA NÃO CONTROLADA
[E]
FSM