10.17 4TH/5TH MIRROR HEIGHT ADJUSTMENT
When:
Purpose:
How:
[A]
CAUTION
Never perform this adjustment unless you have positively verified
that the source of the image skewing is optical and not in the paper
path.
1. Turn off the main switch and remove the exposure glass.
2. Peel off the shielding mylar [A] halfway.
3. Adjust the 4th/5th mirror height by turning the adjusting screw [B].
NOTE: After the adjustment, stick the mylar [A] again in its former position.
FSM
CÓPIA NÃO CONTROLADA
If skewed images appear.
To maintain proper copy quality.
Turn the 4th/5th mirror height adjustment screw.
This changes the 4th/5th mirror height.
[B]
5-65
CÓPIA NÃO CONTROLADA
Rev. 7/95
A156/A160/A162