Ricoh FT5535 Service Manual page 668

SERVICE PROGRAM MODE
12. SERVICE PROGRAM MODE
12.1 SERVICE PROGRAM MODE TABLE
1. Items written in bold italic letters are newly added service programs.
2. Items written in bold are modified service programs from the A161/A162
copiers.
3. A "†" after the mode name means that copies can be made while in this
SP mode.
4. A "‡" after the setting in the "Settings" column means that the actual
factory setting for this is written on the data sheet in the front cover.
5. A "°" before the mode number means that this mode can be accessed by
sales representatives (
•
6. A " " before the mode number means that this mode can be accessed by
users using a UP mode (
Reference Table".
7. In the Function column, comments (extra information) are in italics.
8. In the Settings column, the default values are printed in bold letters.
9. "RDS" means Remote Diagnostic System (not available in these models)
"CSS" means Customer Support System (only available in Japan)
12.1.1 Quick Reference
The following is a quick reference list of the SP Modes.
Mode No.
Paper Feed/Paper Transport/Fusing
1-001 Registration †
1-003-xxx Paper Feed Timing †
1-008 Misfeed Detection †
1-103 Fusing Idling †
°1-104 Fusing Temperature Control †
1-105-xxx Fusing Temperature Adjustments †
1-106-xxx Fusing Temperature Display †
1-108 Forced Start †
1-801 Not used
1-902 Jogger Span Adjustment (Side Fence) †
1-905 Jogger Span Adjustment (End Fence) †
Around the Drum
2-001 Drum Charge Voltage Adjustment (for copying)
A212/A214
CÓPIA NÃO CONTROLADA
→ →
→
). See "UP Mode/SP Mode Cross
Function
5-38
CÓPIA NÃO CONTROLADA
→
).
SM