Ricoh FT5535 Service Manual page 400

4.2 INSTALLATION PROCEDURE
[A]
[C]
[F]
NOTE: (1) Keep the shipping retainers after installing the machine. They
will be reused if the machine will be transported to an another
location in the future.
(2) Proper installation of the shipping retainers is required in order to
avoid any transport damage.
(3) Do not grasp the sorter by the top cover and stay as shown by
[A]. Hold both sides of the sorter as shown by [B]. This is to
prevent damage to the anti-static brush [C].
CAUTION
Unplug the copier power cord before starting the following
procedure.
1. Remove the strips of tape [D] and styrofoam blocks [E].
2. Remove the copy tray [F].
FSM
CÓPIA NÃO CONTROLADA
[B]
[D]
13-5
CÓPIA NÃO CONTROLADA
Rev. 7/95
[E]
[D]
A156/A160/A162