Ricoh FT5535 Service Manual page 683

Mode No.
APS 8 k/16 k
Detection †
(A4 versions
only)
•
°4-902
All Indicators
•
ON †
°5-001
Feed Station
Priority
Selection †
•
°5-002
APS Priority
Selection †
•
°5-003
ADS Priority
Selection †
•
°5-004
Counter
•
°5-013 Up/Down
Selection †
Maximum Copy
•
°5-017 Quantity (Copy
Limit) †
SM
CÓPIA NÃO CONTROLADA
Function
Selects whether the machine can select
8 k/16 k copy paper based on APS
sensor readings.
If "YES" is selected, 8 k/16 k copy paper
is selected under the following conditions:
Size detected by
Selected copy paper size
APS
B4 lengthwise
(267 mm x 390 mm)
A4 lengthwise
(267 mm x 195 mm)
B5 sideways
(115 mm x 267 mm)
If "YES" is selected, the duplex end
fence must be removed to allow the 8 k/
16 k movement of the jogger fences.
Turns on all indicators on the operation
panel for 10 seconds. It can be manually
turned off by pressing the
Selects the paper feed station priority.
Non duplex
Setting
machines
1 1st Tray
2 2nd Tray
3 3rd Tray
4 4th Tray
5 5th Tray
6 LCT
Specifies whether the copier defaults to
APS or manual mode when the main
switch is turned on, auto reset, or mode
cleared.
Specifies whether the copier defaults to
ADS or manual ID mode when the main
switch is turned on, auto reset, or mode
cleared.
Selects whether the counter counts up or
down.
Limits the maximum copy quantity that
can be entered.
5-53
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Settings
0: NO
1: YES
8 k lengthwise
16 k lengthwise
16 k sideways
#
key.
1 ~ 6: Non
Duplex machines
1 ~ 5: Duplex
1st Tray
Default = 1
2nd Tray
(without LCT)
3rd Tray
Default = LCT
4th Tray
LCT
(with LCT)
—
1: APS
2: Manual
Also see
SP6-010.
1: ADS
2: Manual
1: Up
2: Down
1 ~ 999
Default = 999
duplex
machines
machines
(5 or 6)
A212/A214