Ricoh FT5535 Service Manual page 353

6.6 MAIN CONTROL BOARD REPLACEMENT AND
ADJUSTMENT
6.6.1 Main Control Board Replacement
[A]
[B]
1. Remove the proof tray, the rear cover, and the power cord bracket [A].
2. Disconnect the main control board connectors and fiber cable.
3. Replace the main control board [B] and connect the connectors.
4. Turn on the copier main switch.
5. Adjust the bin sensor (see the next page).
6. Turn off the main switch.
A156/A160/A162
CÓPIA NÃO CONTROLADA
10-26
CÓPIA NÃO CONTROLADA
FSM