Ricoh FT5535 Service Manual page 392

6.2 PAPER SENSOR REPLACEMENT
1. Remove the sorter from the copier.
2. Remove the front cover (2 screws).
3. Remove the rear cover (4 screws).
4. Swing up the guide plate [A].
5. Remove the inner cover [B] (4 screws).
6. Replace the paper sensor [C] (1 screw and 1 connector) and reassemble
the machine.
CAUTION
To avoid damaging the sensor, do not over-tighten the sensor
mounting screw.
FSM
CÓPIA NÃO CONTROLADA
[B]
12-11
CÓPIA NÃO CONTROLADA
Rev. 7/95
[A]
[C]
A156/A160/A162