Ricoh FT5535 Service Manual page 471

–A204/A206/A207 copiers–
[A]
[B]
–A208/A210/A211 copiers–
[A]
[B]
CAUTION
1) Never lift the machine by holding the LCT, or the LCT will break.
NOTE: 1) Keep the shipping retainers after installing the machine. They will
be reused if the machine is moved to another location in the future.
2) Proper reinstallation of the shipping retainers is required in order
to avoid any transport damage. It is most important to put back the
scanner lock pin when transporting this copier. If not, skewed
image may result.
1. Remove the scanner lock pin [A] and red tag [B] as shown.
2. Remove the strips of tape and the sheet of paper [C]. Also, for
A206/207/A210/A211 copiers, remove the strip of tape on the LCT [D].
3. Pull out the paper tray [E], and remove the strips of tape and the bottom
plate stopper [F]. Then install the paper tray in the copier (1 tray for
duplex machines and 2 trays for non-duplex machines).
SM
CÓPIA NÃO CONTROLADA
[C]
[F]
–A206/A207/A210/A211 copiers–
[E]
A204I500.wmf
[C]
[F]
[E]
A204I502.wmf
1-39
CÓPIA NÃO CONTROLADA
INSTALLATION
[D]
A204I501.wmf
A207/A208/A211