Ricoh FT5535 Service Manual page 685

Mode No.
Image Shift
Margin
Adjustment †
•
°5-107-001
to
5-107-004
Edge Erase
Margin
Adjustment †
•
°5-108
Center Erase
Margin
Adjustment †
•
°5-110
Coin Lock
°5-113
Installation †
Duplex Image
Shift †
(Back Side
Margin)
5-115
T/C (Total
°5-121 Counter) Count
Up Timing †
OHP Slip
•
°5-122 Sheet Mode
Selection †
APS Detection
5-127
†
SM
CÓPIA NÃO CONTROLADA
Function
This controls the left and right margin
width adjustment for both 1st and 2nd
side copies.
SP5-107-001: Left Margin (1st side)
SP5-107-002: Right Margin (1st side)
SP5-107-003: Left Margin (2nd side)
SP5-107-004: Right Margin (2nd side)
SP5-908 must be at 2 for this to have
any effect; this changes the function of
the Erase key to a Margin Adjustment
key.
A4 version: 1 mm per step
[Range: 0 mm to 15 mm]
LT version: 0.01" per step
[Range: 0" to 0.60"]
Adjusts the edge erase margin width in
erase edge mode.
SP5-908 must be at 1 for this to have
any effect. A strip of the selected width
will be erased around the edges of the
copy image.
Adjusts the center erase margin width in
erase center mode.
SP5-908 must be at 1 for this to have
any effect.
A4 version: 1 mm per step
Range: 8 mm to 25 mm]
LT version: 0.01" per step
[Range: 0.32" ~ 1.00"]
Specifies whether coin lock is installed or
not (only for Japanese versions).
Specifies whether duplex image shift
(back side margin) is used or not.
If "YES" is selected, a 5 mm margin is
made on the right of the reverse side of
copies when making two-sided copies
from one-sided originals.
If the image shift mode has been
selected with SP5-908 and if the user
uses image shift mode, this SP mode
has no effect.
Determines whether the total counter
counts up at paper feed or at paper exit.
Selects whether to have a image on the
OHP slip sheet or not.
Selects whether APS detection is done
or not.
5-55
CÓPIA NÃO CONTROLADA
SERVICE PROGRAM MODE
Settings
A4 version
0 ~ 15
Default = 5
LT version
0 ~ 0.60
Default = 0.20
A4 version
1: 5 mm
2: 10 mm
LT version
1: 0.20"
2: 0.40"
A4 version
8 ~ 25
Default = 20
LT version
0.32 ~ 1.00
Default = 0.80
0: Not installed
1: Installed
0: NO
1: YES
0: Feed
1: Exit
0: Blank
1: Image
0: NO
1: YES
A212/A214