Ricoh FT5535 Service Manual page 561

– Stack mode (from the turn gate section to the bins) –
[F]
[E]
[D]
[H]
[I]
[G]
As with sort mode, the turn gate solenoid stays off and the turn gate [A] stays
up when the key is pressed. The main motor turns clockwise to rotate
the sorter transport rollers [B] and the exit motor rotates the exit rollers [C].
The turn gate directs copies to the sorter bins through the sorter transport
section, then the copies are delivered between the top bin [D] and the upper
guide plate [E]. The jogger plate [F] then jogs to square the copies each time.
All copies of the copy run are then fed to the first bin. When the final copy is
delivered, the wheel drive motor [G] turns and advances the bin one step (the
helical wheels [H] rotate once). When the cut out in the actuator reaches
below the wheel sensor [I], the bin drive motor turns off.
SM
CÓPIA NÃO CONTROLADA
3-9
CÓPIA NÃO CONTROLADA
BASIC OPERATION
[A]
[B]
[C]
A664D501-2.wmf
A207/A208/A211