Ricoh FT5535 Service Manual page 144

11. Exterior (every 100
or 120 k)
12. Copy Process SP
Mode Settings
13. Make a Copy
FSM
CÓPIA NÃO CONTROLADA
1. Clean the covers.
Perform the following SP Modes in the
following order.
1. SP2-214 TD Sensor Initial Setting
2. SP3-001 ID Sensor Initial Setting
3. SP3-112 Forced V
4. * SP4-001 Exposure Lamp Voltage Adj.
5. SP4-201 Auto ADS Gain Adj.
6. * SP3-105 Forced V
*: Perform these SP modes only if the
exposure lamp has been replaced.
Make a copy of an OS-A3 test chart at
manual image density level 4.
4-63
CÓPIA NÃO CONTROLADA
Detection
R
Detection
L
A156/A160/A162