Keyless Entry System Symptom Diagnosis (If Equipped); Keyless Entry System Operation Inspection - Suzuki Grand Vitara 2011 Manual

9F-3 Security and Locks:

Keyless Entry System Symptom Diagnosis (If Equipped)

NOTE
• Confirm that power door lock system is in good condition before referring to the following possible
causes.
• Check each part in the order from the top of the following list.
Condition
All door can not be locked
/ unlocked by only
keyless entry transmitter
Interior light does not
light when doors are
unlocked by keyless entry
transmitter
Hazard warning lights do
not light when doors are
locked/unlocked by
keyless entry transmitter
Transmitter code can not
be programmed to BCM

Keyless Entry System Operation Inspection

NOTE
When performing the this inspection, make sure to have any of the door once opened / closed after the
ignition key has been removed from the ignition key cylinder.
Possible cause
Transmitter battery dead
Door switch faulty
Transmitter faulty
Key reminder switch in ignition switch
faulty
Wiring or grounding faulty
Keyless entry receiver faulty
BCM faulty
Wiring or grounding faulty
BCM faulty
Turn signal and hazard warning relay
faulty
Wiring or grounding faulty
BCM faulty
Door switch faulty
Keyless entry receiver faulty
Key reminder switch in ignition switch
faulty
Wiring or grounding faulty
BCM faulty
Correction / Reference Item
Replace battery referring to "Replacement of
Transmitter Battery (Other than Keyless Start
Model)".
Check door switch referring to "Door Switch
(Front / Rear / Rear End Door) Inspection in
Section 9C".
Replace transmitter.
Check ignition switch referring to "Ignition
Switch Inspection in Section 9C".
Repair circuit.
Check keyless entry receiver referring to
"Keyless Entry Receiver and Its Circuit
Inspection (If Equipped)".
Replace after making sure that none of above
parts is faulty.
Repair circuit.
Replace after making sure that none of above
parts is faulty.
Check turn signal and hazard warning relay
referring to "Turn Signal and Hazard Warning
Relay Inspection in Section 9B".
Repair circuit.
Replace after making sure that none of above
parts is faulty.
Check door switch referring to "Door Switch
(Front / Rear / Rear End Door) Inspection in
Section 9C".
Check keyless entry receiver referring to
"Keyless Entry Receiver and Its Circuit
Inspection (If Equipped)".
Check ignition switch referring to "Ignition
Switch Inspection in Section 9C".
Repair circuit.
Replace after making sure that none of above
parts is faulty.
S6JB0A9604003
S6JB0A9604004