Windshield Wiper And Washer Switch Inspection - Suzuki Grand Vitara 2011 Manual

Windshield Wiper and Washer Switch
Inspection
Windshield Wiper and Washer Switch
Check for continuity between terminals at each switch
position. If check result is not as specified, replace
switch.
[A]
1 2 3 4 5 6
[C]
6
[D]
OFF
INT
LO
HI
MIST
[C]
1
[E]
ON
OFF
[A]: RH steering vehicle without rear fog light
[B]: Other than RH steering vehicle without rear fog light
[C]: Terminal
[D]: Wiper switch
[E]: Washer switch
S6JB0A9406009
[B]
6 5 4 3 2 1
5 4 3
2
I5JB0D940001-01
Intermittent Wiper Relay Circuit
1) Turn the windshield wiper switch to "INT" position.
2) Connect battery positive (+) terminal to terminal "5"
and its negative (–) terminal to terminal "2".
3) Connect voltmeter positive lead to terminal "4" and
its negative lead to terminal "2".
4) Check that the voltmeter indicates the battery
voltage (10 – 14 V).
5) Connect terminal "3" and terminal "5" by a jumper
wire.
[B]
5
4
[A]: RH steering vehicle without rear fog light
[B]: Other than RH steering vehicle without rear fog light
Wipers / Washers: 9D-11
2
2
[A]
3 4 5
3
V
I5JB0D940002-02