Diagnostic Information And Procedures; Immobilizer Control System Check; Diagnostic Trouble Code (Dtc) Check - Suzuki Grand Vitara 2011 Manual

Immobilizer Control System Check

Step
1 Injection warning light ON check
1) Turn ignition switch to ON position using ignition key.
1
Does injection warning light (1) come on?
2 Injection warning light flash check
Does injection warning light flash on and off continuously in
Step 1?
3 Engine start check
1) Start engine using ignition key.
Does engine start?
4 Injection warning light remain ON check
1) Check if injection warning light remains ON after engine
start.
Does injection warning light remain ON after engine start?

Diagnostic Trouble Code (DTC) Check

NOTE
To know how to use SUZUKI scan tool in
detail, refer to its operator's manual.
1) Turn the ignition switch to OFF position.
2) Connect SUZUKI scan tool to data link connector
(DLC) (1) located under instrument panel at driver's
seat side.
Special tool
(A): SUZUKI scan tool
Immobilizer Control System: For Diesel Engine Model 10C-34

Diagnostic Information and Procedures

Action
S6JB0AA324002
Yes
Go to Step 2.
I6JB0AA32003-01
Check ICM for DTC
referring to "Diagnostic
Trouble Code (DTC)
Check: For Diesel
Engine Model".
Go to step 4.
Go to "Injection Warning
Light Remains ON after
Engine Start: For Diesel
Engine Model".
(A)
3) Turn the ignition switch to ON position.
4) Check if any DTC is stored in ICM according to the
instructions displayed on SUZUKI scan tool.
5) After completing the check, turn ignition switch to
OFF position, and then disconnect SUZUKI scan
tool from DLC.
S6JB0AA324001
No
Go to "Injection Warning
Light Does Not Come
ON with Ignition Switch
ON and Engine Stop:
For Diesel Engine
Model".
Go to Step 3.
Go to "Engine and
Emission Control
System Check: For
Diesel Engine Model in
Section 1A".
Immobilizer control
system is in good
condition.
1
I4RS0BA30003-03