Suzuki Grand Vitara 2011 Manual page 2014

9E-9 Glass / Windows / Mirrors:
6) Cut adhesive all around rear quarter window (1) with
piano string (2). When using tool, windshield knife
(3), to cut adhesive, be careful not to cause damage
to windshield. Use wire to cut adhesive along lower
part of windshield.
NOTE
Use piano string (2) as close to glass as
possible so as to prevent damage to body.
7) Using knife (1), smoothen adhesive (2) remaining on
body side (3) so that it is 1 – 2 mm (0.039 – 0.078
in.) thick all around.
NOTE
Before using knife (1), clean it with alcohol or
the like to remove oil from it.
8) When reusing rear quarter window, remove the
adhesive (1) from it, using care not to damage
primer coated surface (2).
Installation
1) Using cleaning solvent, clean rear quarter window
edge where rear quarter window glass is to be
adhered. (Let it dry for more than 10 minutes.)
2) Clean contact surfaces of old adhesive (4), paint or
bare metal thoroughly.
If surfaces of paint or bare metal come out, apply
primer (2) for body with caution not to apply primer
(2) to surface of adhesive remaining on body.
NOTE
• Be sure to refer to primer maker's
instruction for proper handling and drying
time.
• Do not touch body and old adhesive
I3RH0A950006-01 surfaces where glass is to be adhered.
I2RH01950042-01
1. Do not apply primer
3. Apply primer
I2RH01950043-01
I2RH01950046-01