9C-20 Instrumentation / Driver Info. / Horn:
Outside Air Temperature Sensor Inspection (If
Equipped)
Measure resistance of outside air temperature sensor
using an ohmmeter.
If resistance is out of specification, replace outside air
temperature sensor.
Outside air temperature sensor resistance
1.62 kΩ – 1.78 kΩ at 25 °C (77 °F)
5.50
"A"
1.70
0
32
"A": Resistance
"B": Temperature
Instrument Panel Removal and Installation
WARNING
!
Refer to "Air Bag Warning in Section 00"
before starting service work.
CAUTION
!
Position heat control mode into FOOT MODE
before removing instrument panel to avoid
the damage to air flow control door.
S6JB0A9306013
25
77
F
"B"
I4RS0A930017-01
S6JB0A9306014
Removal
1) Disconnect negative cable at battery.
2) Remove driver side instrument panel under cover (1)
and passenger side instrument panel under cover
(2).
1
3) Disable air bag system referring to "Disabling Air
Bag System in Section 8B".
4) Remove steering column hole cover (1).
5) Turn steering wheel to remove steering column
cover screws (3).
6) Remove steering column covers (2).
2
1
7) Remove glove box (1).
8) Remove hood latch release lever (2).
1
2
I5JB0A930011-02
3
3
I5JB0A940020-02
I5JB0A930012-02
2