Door Lock Function Of Keyless Start System; Repair Instructions - Suzuki Grand Vitara 2011 Manual

Hide thumbs Also See for Grand Vitara 2011:
Table of Contents

Advertisement

1) Confirm that power door lock system operates normally, refer to "Power Door Lock System Operation Inspection".
2) All doors are closed and unlocked.
3) Check the following operation:
a) Push "lock" button (1) on transmitter (2) or remote controller once, and check all doors lock and hazard waning
lights flash once.
b) Push "unlock" button (3) on transmitter (2) or remote controller twice, and check all doors unlock and hazard
waning lights flash twice and interior light turns on several seconds with the interior light switch in the middle
position.
If malfunction is found, go to "Keyless Entry System Symptom Diagnosis (If Equipped)".
Door Lock Function of Keyless Start System Symptom Diagnosis (If Equipped)
Proceed to "Keyless Start System Symptom Diagnosis in Section 10E" in case that doors cannot be locked and
unlocked by operating the request switch at the outside door handle.
Front Door Lock Assembly Components
5
1. Front door latch assembly
: Apply lithium grease 99000-25011 to sliding and rotating parts and spring if any.
2. Outside handle assembly
: Apply lithium grease 99000-25011 to sliding part.
3. Outside handle frame
: Apply lithium grease 99000-25011 to sliding part and spring.

Repair Instructions

(a)
4
(a)
(b)
1
1
3
2
I6JB0A960001-01
6
(a)
7
4. Latch striker
5. Shim
6. Key cylinder
Security and Locks:
9F-4
S6JB0A9604005
S6JB0A9606001
2
3
I5JB0A960002-02
7. Inside handle bezel
: 5.0 N⋅m (0.5 kgf-m, 4.0 lb-ft)
: 10 N⋅m (1.0 kgf-m, 7.5 lb-ft)

Advertisement

Table of Contents
loading

Table of Contents