9B-17 Lighting Systems:
Reference waveform No.1
Vehicle speed signal (1).
Vehicle speed signal is pulse. Pulse frequency varies depending on vehicle speed.
Measurement terminal
Oscilloscope setting
Measurement condition
Headlight Housing Removal and Installation
WARNING
!
Be sure to read "Precautions for Discharge
Headlight Service (If Equipped)" before
starting to service work.
Neglecting them may result in personal
injury.
Removal
1) Disconnect negative (–) cable at battery.
2) Remove front bumper. Refer to "Front Bumper
Components in Section 9K".
3) Remove headlight mounting bolts.
4) Detach headlight housing (1) from vehicle.
5) Disconnect couplers from headlight housing (1).
1
CH 1: "G51-16" to "G51-9"
CH 1: 5 mV
TIME: 200 ms/DIV
Engine is running and vehicle speed 10 km/h (6 mph)
Repair Instructions
Installation
S6JB0A9206001
Reverse removal procedure noting the following.
• After installation, be sure to inspect and adjust aiming
referring to "Headlight Aiming Adjustment with
Screen".
Headlight Bulb Replacement
• To avoid danger of being burned, don't
• Don't touch glass surface of bulb, to avoid
• Be sure to read "Precautions for Discharge
Discharge headlight Bulb
1) Check to ensure that lighting switch is at OFF
position.
2) Disconnect negative (–) cable at battery.
3) Remove headlight housing referring to "Headlight
Housing Removal and Installation".
4) Remove cover (1) from headlight housing by turning
it counterclockwise.
I5JB0A920015-01
I5JB0A920037-01
WARNING
!
touch when the bulb is hot.
deteriorate as the case may be unclear
when bulb light on at dirty condition.
Headlight Service (If Equipped)" before
starting to service work.
S6JB0A9206002