Siruba LBHS-1790S Instruction Book / Parts List page 97

錯誤代碼
Error code
•檢測出電源瞬間斷電
輸入電源瞬間斷電時
E802
•Power instantaneous cut detection
When input power is instantaneously OFF.
•過高電壓
輸入電源達 280V 以上時
E811
•Overvoltage
When input power is 280V or more.
•過低電壓
輸入電源達 150V 以下時
E813
•Low voltage
When input voltage is 150V or less.
•主軸馬達 IPM 異常
伺服控制基板的 IPM 異常時
E901
•Abnormality of main shaft motor IPM
When IPM of servo control p.c.b. is abnormal.
•主軸馬達電流過大
縫紉機馬達裡電流過大時
E902
•Overcurrent of main shaft motor
When current flows excessively to sewing machine motor.
•脈衝馬達電源異常
伺服控制基板的脈衝馬達電源變動 ±15％以上時
E903 •Abnormality of stepping motor power
When stepping motor power of servo control p.c.b.
fluctuates ±15% or more.
•繼電器電源異常
伺服控制基板的繼電器電源變動 ±15％以上時
E904 •Abnormality of solenoid power
When solenoid power of servo control p.c.b. fluctuates
±15% or more.
•伺服控制電路板用熱敏溫度異常
伺服控制電路板的熱敏電阻達 85 以上時
•Abnormality of temperature of heat sink for servo control
E905
p.c.b.
When temperature of heat sink of servo control p.c.b. is
85˚C or more.
•機針擺動馬達原點檢索錯誤
原點檢索動作時，原點感測器信號沒有被輸入時
E907 •Stitch width motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
•Y 送馬達原點檢索錯誤
原點檢索動作時，原點感測器信號沒有被輸入時
E908 •Y feed motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
•上線切線馬達原點檢索異常
原點檢索動作時，原點感測器信號沒有被輸入時
E909 •Needle thread trimmer motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
•壓腳馬達原點檢索錯誤
原點檢索動作時，原點感測器信號沒有被輸入時
E910 •Presser motor origin retrieval error
When origin sensor signal is not inputted at the time of
origin retrieval motion.
錯誤內容
Description
Introduction
復位方法
How to recover Place of recovery
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
電源 OFF
Turn OFF the power.
復位地點
P79