Advertisement
5. 為了防止對人身的傷害，請不要在卸下馬達
外罩、眼睛保護罩等安全裝置的狀態下運轉
縫紉機。
6. 為了防止對人身的傷害，放倒縫紉機時和
返回到原來的位置時，請注意不要夾到手指
等。
7. 為了防止觸電和損壞電氣零件的事故，插拔
電源插頭之前請一定關掉電源開關。
8. 為了防止損壞電氣零件的事故，打雷時，請
停止操作，拔下電源插頭，以保證安全。
9. 為了防止損壞電氣零件的事故，從寒冷的
地方移動到暖和的地方等時，容易發生結露
現象，所以請待水滴完全乾燥之後再打開電
源。
10. 為了防止損壞電氣零件的事故，停電時，請
一定關掉電源。
11. 本裝置請在工業用環境下使用。在一般家
庭裡使用時如果靠近電視機或收音機使用的
話，有發生接收不良的故障。
12. 因為本產品屬於精密機器，所以操作時請充
分注意，不要把水、油濺到機器上面，也不
要讓機器掉落給與基氣衝擊。
13. 本機器是 A 級工業用機器。在家庭環境下使
用此機器的話，有可能發生電波干擾的現象。
此時，請使用人採取適當的措施解決電波干
擾問題。
xii
5. To prevent from body injuring, please do
not take off motor cover, eyes guard or
other safety devices while operating.
6. To prevent from body injuring, be caution
do not clip your fingers, etc while putting
down sewing machine or put the machine
back to the original position.
7. To prevent from electric shock or the
incident of electrical parts damage, please
turn off power supply before plug in or out
the plug from the socket.
8. In order to prevent from incidents which
damage of electrical parts, for your safety,
please stop operating and take off power
plug if it thundered.
9. In order to prevent from incidents which
damage of electrical parts, if move the
machine from cold place to warm place, it
may happen condensation. Please restart
the machine after it completely dry up.
10. In order to prevent from incidents which
damage of electrical parts, please turn off
power while blackout.
11. Please use the device at industrial
environment. If use the device nearby
television or radio at general home place,
it may happen malfunction like poor
reception.
12. Since our products are precision machine,
please operate it with full caution that do
not let water our oil splash on the machine,
also do not let the machine hit on the
ground.
13. Our products are A class industrial
machine. If operation the machine at
general home place, it may happen radio
wave interference. At the time, please take
the adequate measurement to solve the
problem.
Advertisement
