Advertisement
12. 縫製資料編輯有／無的設定方法
購買時，本縫紉機把使用頻率低的縫製資
料項目目設定為不能編輯。如果縫製物需
要進行更詳細的設定， 請將該縫製資料項
目目設定為可以編輯狀態。
＊縫製資料的編輯有／無的設定，當把 S52 右
平行部張力設定為無編輯後，則用 S51 左平
行部張力進行縫製。如果把 S56 第 2 加固張
力設定為無編輯後，則用 S55 第 1 加固張力
進行縫製。設定為不編輯其他的縫製資料項
目時，則為初期值數據。
1) 設定為輸入模式
液晶顯示①的背景照明為藍色輸入模式時，
可以設定。背景照明為綠色的縫製模式時，
請按準備鍵 ②
2) 叫出縫製資料有／無編輯的變換畫面
3 秒鐘之後，顯示出資料有
按資料鍵 ⑧
／無編輯的變換畫面 A、B。
3) 選擇想變換的縫製資料
按項目選擇鍵 ⑩
數據項目 C。此時，僅可以選擇可以變換的
項目。
4) 變換有／無編輯
按數據變更鍵
料圖示顯示 C 可以反覆反轉／不反轉。
反轉顯示：可編輯
不反轉顯示：不可編輯返回步驟 3，可以轉
換複數的縫製資料項目。
5) 保存設定的資料
按準備鍵②
之後，變為保存狀態，2 秒
鐘後返回原來的畫面。按復位鍵 ③
後，不保存返回原來的畫面。
P36
變換為輸入模式。
，選擇想變換的縫製
之後，選擇的縫製資
之
12. Method of setting sewing data with/
without edit
This sewing machine has been set so
as not to be capable of editing sewing
data items which are less frequently used
at the time of your purchase. When you
desire to set the data more closely in
accordance with the sewing products, set
the sewing data item to the edit possible
state and use the machine.
＊ For the setting of sewing data with/without
edit, when S52, right parallel section
tension is set to without edit, sewing
is performed with the data of S51 left
parallel section tension. When S56, 2nd
bar-tacking tension is set to without edit,
sewing is performed with the data of S55,
1st bar-tacking section.
When the sewing data items other than
the above ones are set to without edit,
the data to be referred are the initial value
data.
1) Set the mode to the input mode.
When the back-light of LCD display
① shows the input mode in blue color, it is
possible to set. When the back-light shows
the sewing mode in green color, press
READY key ②
to change over to the
input mode.
2) Call sewing data with/without edit
changeover screen.
Press DATA key ⑧
three seconds, and data with/without edit
changeover screen A or B is displayed.
3) Select sewing data you desire to change
over.
Press ITEM SELECTION key ⑩
and select sewing data item C you desire
to change over.At this time, changeover
possible item only can be selected.
4) Changeover of with/without edit
Press DATA CHANGE key
pictograph display C of sewing data
repeats reverse/non-reverse.
Non-reverse display : With edit
Reverse display : Without edit
Return to step 3), and plural sewing data
items can be changed over.
5) Save data which have been set.
Press READY key ②
in the state of being changed over can
be saved. After two seconds, the screen
returns to the former one. Press RESET
key ③
, and the screen returns to the
former one without saving the data.
for as long as
,
, and
, and the data
Advertisement
