Advertisement
6. 濾清器的清掃
請每週清掃機台下面的風扇篩過濾器②。
●
1) 沿箭頭方向拉過濾網①，把它卸下來。
2) 用水沖洗清掃濾清器②。
3) 把濾清器②、過濾網①安裝到原來的位
置。
注意
CAUTION
Hole under table for fan
7. 保險絲的更換
使用 3 個保險絲。
●
①脈衝馬達電源保護用 5A（延時保險絲）。
②電磁，脈衝馬達電源保護用 3.15A（延時
保險絲）。
③控制電源保護用 2A（速斷型保險絲）。
P72
為了防止突然起動造成人身事故，請關掉電源，確認馬達確實停止轉動後
再進行操作。
To protect against possible personal injury due to abrupt start of the
machine, be sure to start the following work after turning the power off
and ascertaining that the motor is at rest.
機台
Table
機台下面的風扇孔
6. Cleaning the filter
Clean filter ② of the fan located on the
●
bottom surface of the machine table (bed
base) once every week.
1) Pull the screen kit ① in the direction of
the arrow to remove it.
2) Wash the filter ② under running water.
3) Reinstall the filter ② and the screen kit
① .
②
7. Replacing the fuse
The machine uses the following three
●
fuses :
① For pulse motor power supply
protection 5A (time-lag fuse)
② For solenoid and pulse motor power
supply protection 3.15A (time-lag fuse)
③ For control power supply protection 2A
(fast-blow type fuse)
①
Advertisement
