Advertisement
11. 變更縫製數據
(1) 購買時的初期縫製資料
購買時，已經登記了 1 ～ 10 的圖案，
該縫製資料僅切布長度的各種不同的角
型形狀的初期值被輸入。 →角型形狀初
期值請參照 X. 各種形狀的初期值資料
一覽表
圖案 No.
Pattern No.
1
2
3
4
5
6
7
8
9
10
(2) 縫製資料的變更方法
1) 設定為輸入模式
用液晶顯示①背景照明藍色輸入方法，
可以變更縫製數據。背景照明綠色的縫
製方法的場合， 請按準備鍵 ②
換輸入方法。
2) 叫出縫製資料編輯畫面
按資料鍵 ⑧
擇的圖案 NO. 的縫製資料編輯畫面 A。
P34
17.5mm(11/16 英吋 )(11/16＂)
變
之後，顯示出現在被選
11. Changing sewing data
(1) Initial sewing data at the time of your
purchase
Patterns from 1 to 10 have been
already registered at the time of your
purchase. Initial values of the square
type, the cloth cutting length of which
only is different from each other, have
been inputted in the sewing data. →
Refer to X.INITIAL VALUE DATA FOR
EACH SHAPE TABLE.
S02
切布長度
Cloth cutting length
6.4mm(1/4 英吋 )(1/4＂)
9.5mm(3/8 英吋 )(3/8＂)
11.1mm(7/16 英吋 )(7/16＂)
12.7mm(1/2 英吋 )(1/2＂)
14.3mm(9/16 英吋 )(9/16＂)
15.9mm(5/8 英吋 )(5/8＂)
19.1mm(3/4 英吋 )(3/4＂)
22.2mm(7/8 英吋 )(7/8＂)
25.4mm(1 英吋 )(1＂)
(2) Changing procedure of sewing data
1) Set the mode to the input mode.
When the back-light of LCD display ①
shows the input mode in blue color,
it is possible to change the sewing
mode. When the back-light of shows
the sewing mode in green color, press
READY key ②
input mode.
2) Call sewing data edit screen.
Press DATA key ⑧
data edit screen A of the pattern
No. which is selected at present is
displayed.
S02
to change over to the
, and sewing
Advertisement
