Advertisement
(2) 計數器類別
1. 縫製加數計數器
每進行 1 形狀的縫製之後，現在值數字加 1。
現在值和設定計數器 。
1. Sewing UP counter
Every time the sewing of one shape is performed, the existing value is counted up.
When the existing value is equal to the set value, count-up screen is displayed.
2. 縫製減數計數器
每進行 1 形狀的縫製之後，現在值數字減 1。
現在值到達 0 之後，顯示出減數計數器畫面。
2. Sewing DOWN counter
Every time the sewing of one shape is performed, the existing value is counted
down.
When the existing value is reached to "0", count-up screen is displayed.
3. 件數加數計數器
每進行 1 個週期或 1 個連續縫製之後，現在值數字加 1。
現在值和設定值相等之後，顯示出 加數計數器畫面。
3. No. of pcs. UP counter
Every time one cycle or one continuous stitching is performed, the existing value is
counted up.
When the existing value is equal to the set value, count-up screen is displayed.
4. 件數減數計數器
每進行 1 個週期或 1 個連續縫製之後，現在值數字減 1。
現在值到達 0 之後，顯示出減數計數器畫面。
4. No. of pcs. DOWN counter
Every time one cycle or one continuous stitching is performed, the existing
value is counted down.
When the existing value is reached to "0", count-up screen is displayed.
5. 不使用計數器
5. Counter not used
(3) 計數器類別
縫製作業中如果到達加數條件之後，則顯
示出加數畫面 E。按復位鍵③
位元數目器， 返回縫製模式。而且，開始
再記數。
(2) Kind of counter
(3)Count-up releasing procedure
When count-up condition is reached during
sewing work, the whole count-up screen E
之後，復
flashes on and off. Press RESET key ③
to reset the counter, and the mode returns
to the sewing mode. Then the counter
starts counting again.
E
Introduction
P31
Advertisement
