Advertisement
18. 進行迴圈縫製時
本縫紉機可以順次地縫製複數的迴圈縫製
圖案資料。 最大可以輸入 15 種圖案，請
在縫製物上有複數不一樣的扣眼時使用。
另外，最多還可以登記 20 個資料。 需要
時，請拷貝之後使用。→請參照 14. 複製
縫製圖案 的內容。
⑴迴圈資料的選擇
1) 設定為輸入模式
液晶顯示① 背景照明為藍色輸入模式時，
可以選擇迴圈縫資料。背景照明為綠色的
縫製模式時，請按準備鍵②
入模式。
2) 叫出編輯的迴圈縫資料 NO.
按圖案 NO. 鍵⑦
擇畫面 A。現在被選擇的圖案 NO.B 閃亮
顯示。
3) 選擇迴圈縫製資料
按項目選擇鍵⑩
案順 序地變更顯示，最後登記圖案 NO.
後，顯示被登記的迴圈資料 NO.、連續縫
資料 NO.。這時， 請選擇想縫製的迴圈
資料 NO.。
4) 進行縫製
在迴圈資料被選擇的狀態，按準備鍵②
之後，液晶顯示①的背景照明變為綠
色，成為可以縫製的狀態。購買時僅登記
了迴圈資料 NO.1，沒有輸入縫製圖案，
不能成為縫製狀態。因此，請參照 （2）
迴圈縫資料的編輯方法 進行輸入。
P54
變更為輸
之後，顯示出圖案選
之後，被登記的圖
18. Performing cycle stitching
This sewing machine can perform sewing
of plural sewing pattern data in one cycle
in the order of the data.Use this stitching
when sewing plural different button holes
on the sewing product since as many
as 15 different kinds of patterns can be
inputted.In addition, registration of as
many as 20 cycles can be performed.
Copy and use the data to fill the
needs. → Refer to 14. Copying sewing
pattern
(1) Selection of cycle data
1) Set the mode to the input mode.
When the back-light of LCD display ①
shows the input mode in blue color, it is
possible to select cycle data. When the
back-light shows the sewing mode in
green color, press READY key ②
change over to the input mode.
2) Call pattern selection screen.
Press PATTERN No. key ⑦
pattern selection screen A is displayed.
Pattern No. B which is selected at
present flashes on and off.
3) Select cycle stitching data.
Press ITEM SELECTION key ⑩
, and patterns which have been
registered are changed over and
displayed in order. Cycle data No. and
continuous stitching data No. which
have been registered after the last
registered pattern No. are displayed.
Here, select the cycle data No. which
you desire to sew.
4) Perform sewing.
Press READY key ②
that the cycle data is selected, and
the back-light of LCD display ① shows
green and it is possible to sew.Cycle
data No. 1 only has been registered at
the time of your purchase. However,
sewing status cannot be obtained
since the sewing pattern has not been
inputted. Perform inputting of sewing
pattern referring to ⑵ Method of editing
cycle data.
to
, and
in the state
Advertisement
