Advertisement
17. 進行連續縫製時
本縫紉機，可以不提升壓腳，連續縫製複
數圖案。 在 1 迴圈中最多可以自動地縫製
6 種形狀。 另外，最多還可以登記 20 個
資料。需要時，請複製之後使用。→請參
照 14. 複製縫製圖案的內容 。
＊有的設定條件，需要更換購買時安裝的
零件。
⑴連續縫製資料的選擇
1) 設定為輸入模式
液晶顯示① 的背景照明為藍色的輸入模
式時， 可以選擇連續縫製資料。背景照
明為綠色的縫制模式時，請按準備鍵②
變換為輸入模式。
2) 叫出圖案選擇畫面
按圖案 NO. 鍵⑦
擇畫面 A。現在被選擇的圖案 NO.B 閃亮
顯示。
3) 選擇連續縫製資料
按項目選擇鍵⑩
案按 順序變換顯示，最後登記圖案 NO.
之後顯示被 登記的迴圈資料 NO.，連續
縫製 NO.。在這裡請選擇想縫製的連續縫
製資料 NO.。
4 ) 進行縫製
在連續縫製資料被選擇的狀態，按準備
鍵②
之後，液晶顯示①的背景照明變
為綠色成為可以縫製的狀態。購買時僅
登記了連結資料 NO.，而縫製圖案沒有
被輸入，所以不能成為可以縫製的狀態。
請參照下頁 (2) 連續縫製資料的編輯方法
進行以上的輸入。
P50
之後，顯示出圖案選
之後，被登記的圖
17. Performing continuous stitching
This sewing machine can perform
continuous stitching which is capable of
continuously sewing plural sewing pattern
data without lifting the presser foot. It
is possible to automatically sew up to
maximum 6 shapes in one cycle.
In addition, registration of as many as 20
data can be performed. Copy and use
the data to fill the needs. → Refer to 14.
Copying sewing pattern
＊ It is necessary to change the parts
from the state at tht time of your purchase
according to the setting conditions.
(1) Selection of continuous stitching data
1) Set the mode to the input mode.
When the back-light of LCD display ①
shows the input mode in blue color, it is
possible to select continuous stitching
data. When the back-light shows the
sewing mode in green color, press
READY key ②
input mode.
2) Call pattern selection screen.
Press PATTERN NO. key ⑦
pattern selection screen A is displayed.
Pattern No. B which is selected at
present flashes on and off.
3) Select continuous stitching.
Press ITEM SELECTION key ⑩
, and patterns which have been
registered are changed over and
displayed in order. Cycle data No. and
continuous stitching data No. which
have been registered after the last
registered pattern No. are displayed.
Here, select the continuous stitching
data No. which you desire to sew.
4) Perform sewing.
Press READY key ②
continuous stitching data is selected,
and the back-light of LCD display ①
shows green and it is possible to sew.
Continuous stitching data No. 1 only
has been registered at the time of your
purchase. However, sewing status
cannot be obtained since the sewing
pattern has not been inputted. Perform
inputting of sewing pattern referring
to ⑵ Method of editing continuous
stitching data on the next page.
to change over to the
, and
in the state that
Advertisement
