Advertisement
為了安全地使用 LBHS-1790S
縫紉機的注意事項
• 危險
1. 為了防止觸電事故，打開電源時，請不要打
開馬達電氣箱蓋，也不要觸摸電氣箱內的零
件。
2. 變更圖案後，請確認落針位置。萬一圖案壓
腳超越圖案範圍，縫製中有可能機針與壓腳
相碰，發生斷針的危險。另外，請確認被設
定的壓腳和安裝到縫紉機的壓腳是否一致。
• 注意
1. 打開（ON）電源開關後，操作盤上什麼也
不顯示時，請關閉（OFF）電源開關，然後
確認電源電壓和電源規格。
2. 為了防止造成人身事故，打開電源時和縫紉
機運轉途中，請不要把手指放到挑線桿、布
壓腳、布切刀以及機針下面的附近。
3. 為了防止突然的啟動造成人身事故，放倒縫
紉機時，拆卸馬達外罩時，請關掉電源。
4. 為了防止捲入機器的人身事故，縫紉機運轉
中請不要把手指、頭髮、衣服靠近馬達、切
刀等驅動部分，也不要把物品放到機器的上
面。
PRECAUTIONS TO BE TAKEN
SO AS TO USE THE LBHS-1790S
SERIES MORE SAFELY
•DANGER
1. To avoid electrical shock hazards, neither
open the cover of the electrical box for the
motor nor touch the components mounted
inside the electrical box.
2. After changing the pattern, make sure
the needle entry point. If the pattern is
protruded from the work clamp feet, the
needle will interfere with the work clamp
feet during sewing, and it is dangerous
due to the needle breakage or the like.
•CAUTION
1. Please turn OFF power switch and check
the power voltage and power specification
if the operational panel did not show
anything after turned ON power switch.
2. Please do not put your fingers under
thread take-up lever, presser foot, trimmer,
and needle while turn on power stitch and
operating the machine in order to prevent
from body injuring.
3. To prevent from body injured which cause
by the sudden start up of the machine,
please turn OFF power switch when put
down the sewing machine and take off
motor cover.
4. To prevent from body injured which cause
by operating the machine, do not let your
fingers, hair, and clothes near motor,
trimmer, or other driving parts; also do not
put any subject on the machine.
Introduction
xi
Advertisement
