Download Print this page

Siruba LBHS-1790S Instruction Book / Parts List page 28

Advertisement

9. 電線的處理
⑴請一邊慢慢地放倒縫紉機,一邊確認電纜
沒有被勾住。
⑵如圖所示,用電線固定板①固定電線。
注意 : 放倒縫紉機時,請確認機頭支桿②安裝在機臺上。
Caution:When you tilt the sewing machine, make sure that the sewing machine head
support bar ② is placed on the table.
10. 眼睛保護罩的安裝
請一定安裝眼睛保護罩①後再使用縫紉
機。
危險
DANGER
When placed longitudinally
操作人員 Operator
P10
為了保護斷針飛起弄傷眼睛,請一定安裝起來。
Be sure to attach this cover to protect the eyes from the disperse of
needle breakage.
豎立設置時
9. Managing the cord
⑴ Slowly tilting the sewing machine, check
that the cords are not forcibly pulled.
⑵ Fix the cords with cord setting plate ① as
shown in the figure.
10.Installing the eye protection cover
Be sure to install and use eye protection
cover ① and use the sewing machine.
橫向設置時
When placed horizontally
操作人員 Operator

Advertisement

loading