Siruba LBHS-1790S Instruction Book / Parts List page 26

5. 安全開關的連接
把安全開關插頭①連接到機頭側的插頭②
上。
6. 旋梭防油板的安裝
用固定螺絲② 把旋梭防油板①安裝到機台座
③ 上。
注意 : 放倒縫紉機或抬起縫紉機時，請注意固定好不要碰到旋梭防油板①。
Caution:Fix the sewing machine so that it does not come in contact with hook oil shield
plate ① when raising/tilting the sewing machine.
7. 操作盤的安裝
請把操作盤安裝板①用木螺絲②固定到機臺
上， 然後把電纜線穿過機台孔③。
P8
5.Connecting the safety switch connector
Connect safety switch connector ① with
connector ② located on the machine head
side.
①
電纜夾 Cord clamp
6.Installing the hook oil shield plate
Install hook oil shield plate ① onto bed base
③ with setscrew ② .
①
③
②
7.Installing the operation panel
Fix operation panel attaching plate ① on the
table with woodscrew ② and pass the cable
through hole ③ in the table.
③
②
①
②