8.11.8 PFL / CUE
The pre-fade listen function varies slightly depending on the console edition.
Fader Start Edition
On Fader Start consoles, the function is called PFL and can be found on the large key at the bottom of the
fader strip. Multiple PFLs can be active to listen to a number of sources:
·
On a closed fader, press PFL to route the source onto the stereo PFL bus; the PFL automatically
cancels when you open the fader.
·
On an open fader, press PFL to put the channel into "PFL Prepare". Nothing happens until you close
the fader; once the fader is closed, PFL becomes active.
Button Start Edition
On Button Start consoles, the pre-fade listen function is called CUE and can be found on one of the small
buttons by the electronic display. Multiple CUEs can be active to listen to a number of sources.
·
On any fader (open or closed), press CUE to route the source onto the stereo cue bus. To remove the
source from the cue bus, deselect the CUE button.
Note that on a Button Start console, there is no automatic cancellation of PFL and no "PFL Prepare".
Monitoring Options
Whenever PFL (or CUE) is active, the bus is switched to the control room speakers and DJ headphones. The
monitor outputs will return to their active monitor source once all PFL (or CUE) selections are cleared.
Select CLEAR PFL on the Central Module to cancel all active PFLs quickly.
The default PFL mode can be changed from the
96/179
SYS
menu.
Version: 6.4.0/2
8. Operation
ruby standard configuration User Manual
Need help?
Do you have a question about the Ruby standard configuration and is the answer not in the manual?