LAWO Ruby standard configuration User Manual page 178

Preparing the Clients
1. Install the Codemeter Runtime software (Version 5.10 or above) on each of the client computers.
2. Connect the clients (and server) to the network - on startup, the CodeMeter Runtime software sends a
broadcast message across the network to find all license servers.
3. On each client computer, open the
4. From the Home page, select the name of the computer - a dialogue box should appear listing all the
available license servers:
5. Choose the correct server from the drop-down list and click on Select.
If the license server is not found, then your firewall or network policy may not allow messages to be broadcast.
In this case, you will need to add the server's IP settings to the search list, manually, as follows:
Under Configuration -> Network, add the correct IP settings into the Server Search list:
Click Apply and restart the CodeMeter Runtime software.
Note that once the Server Search list has an entry, all other license servers (announced automatically to the
network) will be ignored.
178/179
Codemeter Control Center
Version: 6.4.0/2
11. Appendices
and select WebAdmin.
ruby standard configuration User Manual