LAWO Ruby standard configuration User Manual page 83

8. Operation
8.9.6 Limiter
A separate Limiter is available for all sources.
Ø
To access the limiter parameters, press an ACCESS key followed by LIM on the Central Module.
Surface Controls (Limiter)
The following parameters are available for the Limiter:
·
LIM - on/off for the limiter: red = on.
·
THRS - threshold from -93dB to +27dB.
·
RLS - release time from 10ms to 5000ms.
The Limiter graph on DisplayDock includes a green ball which represents the output level of the Limiter.
This changes dynamically as the signal level varies, and so is extremely helpful when adjusting parameters.
ruby standard configuration User Manual Version: 6.4.0/2
DisplayDock
83/179