System Configuration Sub-Menu - Safran RX-1 User Manual

Compact operational receiver
Hide thumbs Also See for RX-1:
Table of Contents

Advertisement

5.3.4

System Configuration Sub-Menu

The System Configuration Menu will give access to high level parameters and status:
Network configuration (M&C and TM) menus
Alarm menu
Version Menu
Serial Number Menu
Date and Time Menu
SW Update Menu
For the TM, if the IP address is set to 0.0.0.0, the UDP CH10 stream will be sent to the first Ethernet physical
interface available. Those parameters are defined in the CH10 xml configuration file (refer to §Erreur ! Source du
renvoi introuvable.)
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Figure 30: RX-1 System Menu (M&C and TM Sub-Menu)
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
Previous Ref.:
Date:
Safran Data Systems
This document is the property of
08
-
21/06/2021
.
Page 68

Advertisement

Table of Contents
loading

Table of Contents