5.3.1
Data Configuration Sub-Menu
The various parameters are highlighted using the Arrow keys and selected with the "Enter" key.
The Data parameter allows to change the polarity of the signal for every bit-sync output
The Clock parameter allows to set the clock phase relatively to data signal.
Derandomizer (as per IRIG106) is also known as RNRZ-L based on a PN15 sequence. It is as an input code of
the bit-synchronizer.
Randomizing data is recommended for Telemetry, as it allows a uniformed energy distribution in the emitted
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
08
Previous Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 59