When the video Type is set to Tape, video outputs are used to send the RF received signal transpose on an IRIG
carrier Frequency.
Tape Output : Enabled / Disabled
Tape Freq. Frequency of the carrier IRIG (10MHz maximum)
Figure 46: RX-1 Advanced Menu (Video Sub-Menu - Type Tape)
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
08
Previous Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 89