Table of Contents
Advertisement
Other AGC modes are not operational. In Freeze, AGC remains fixed at the current gain. It is used for G/T
calculation.
AGC can be set in Manual mode with an explicit Gain (set-up as a % of total gain range). This mode is used for
maintenance.
AGC gain is set-up to allow an output voltage in relation to input signal strength. AGC output level is generally
used on tracking systems to select the best channel for tracking, based on the received signal strength.
AGC polarity allows to invert the AGC slope, to adapt to the tracking system expected signal
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
08
Previous Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 63
Advertisement
Table of Contents
