By Scrolling down parameters, access is given to AM demodulation configuration.
These two parameters allow to set-up the output AM voltage for a given modulation depth, as expected by the
tracking system. 2VPP for 30% modulation depth are common values.
This parameter can be used to invert the polarity of AM output voltage, depending on what is expected by the
tracking system.
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
08
Previous Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 65