Table of Contents
Advertisement
9.4
Extra commands
Path : [
HKLM\SOFTWARE\IN-SNEC\rtrnt\common\extracmd
Register Key
reset_ctx_enabled
reset_ip_enabled
shutdown
The 3 extra commands are defined in document Erreur ! Source du renvoi introuvable.
9.5
TCP/IP or UDP/IP frame setup with Reed Solomon FEC
Path : [
HKLM\SOFTWARE\IN-SNEC\rtrnt\common\fec\rs
Register Key
SyncWordEnable
CheckSymbEnable
InterleavingEnable
SyncWord
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Type
DWORD
Authorization for receiving an extra command to restore the software
default configuration
0 : not authorized
1 : authorized (Default)
Default : 1
DWORD
Authorization for receiving an extra command to initialize the Ethernet
ports configuration.
0 : not authorized
1 : authorized (Default)
DWORD
Authorization for receiving an extra command to switch off the
equipment.
0 : not authorized
1 : authorized (Default) - for RX1 only
Type
DWORD
RS Frame Sync Word transmission :
0 : disable
1 : enable (Default)
DWORD
RS Check symbols transmission:
0 : disable
1 : enable (Default)
DWORD
RS interleave :
0 : disable
1 : enable (Default)
DWORD
RS syncword transmitted after decoding.
Defaut : 0x1ACFFC1D
Note : Specific application with GMDR, the ASM pattern can be changed
after decoding.
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
08
Previous Ref.:
Date:
21/06/2021
]
Description / Default Value
]
Description / Default Value
Safran Data Systems
-
.
Page 131
Advertisement
Table of Contents
