Connector Description - Safran RX-1 User Manual

4.4.1

Connector description

The description of each connector is listed in the following tables:
On back panel
Analog FM
PCM/FM
PCM/FM trellis
SOQPSK
Combiner ON
ARTM CPM
Independent
channels
Combiner ON
Independent
Channels
Data
Status
It can be noticed that the Video Output connectors (I/V1, I/V2, Q/V1, Q/V2) have multiple uses
depending on the expected signal (Video/Baseband or Tape Output), the modulation scheme, and
the combiner.
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Signal Type
RF in N
IF in BNC
Tape In BNC
IF out BNC
AGC out BNC
AM out BNC
Video BNC
Video I Out BNC
Video I Out BNC
Video I Out BNC
Video Q Out BNC
Video I Out BNC
Video Q Out BNC
Video I Out BNC
Video Q Out BNC
Tape Out BNC
BNC
Tape Out
BNC
Clock BNC
Data BNC
Carrier
LEMO
Detection
Lock status LEMO
Table 1: RX-1 Channels Connectors Description
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104047
Is.Rev 08
Previous Ref.:
Date: 21/06/2021
RX-1 Channels Connectors
Channel 1 Channel 2
RF1 IN RF2 IN
IF1 IN IF2 IN
AUX1 IN AUX2 IN
IF1 OUT IF2 OUT
AGC1 OUT AGC2 OUT
AM1 OUT AM2 OUT
I/V1 OUT I/V2 OUT
I/V1 OUT I/V2 OUT
N/A N/A
N/A N/A
I/V1 OUT I/V2 OUT
Q/V1 OUT Q/V2 OUT
I/V1 OUT I/V2 OUT
I/V1 OUT I/V2 OUT
Q/V1 OUT Q/V2 OUT
J60 J62
J61 J63
J70 J71
J71 J72
Safran Data Systems
-
Combiner
IF OUT
AGC OUT
AM OUT
Q/V1 & Q/V2
Q/V1 & Q/V2
Q/V1 & Q/V2
I/V1 & I/V2
Q/V1 & Q/V2
N/A
N/A
Q/V1 & Q/V2
J64
J65
J73
.
Page 31