Safran RX-1 User Manual page 128

timeSource

<timeFormat> tag
This field is used to fill the bits 2 to 3 of the Packet Flags of the UDP Packet Header.
Tag name
timeFormat

<checksumSize> tag
This field is used to fill the bits 0 to 1 of the Packet Flags of the UDP Packet Header.
Tag name
checksumSize

<alignmentMode> tag
This field is used to fill the bit 21 of the PCM Packet Channel-Specific Data of the UDP Packet Body.
Tag name
alignmentMode

<dataMode> tag
This field is used to fill the bits 18 to 20 of the PCM Packet Channel-Specific Data of the UDP Packet
Body.
Tag name
dataMode

<udpMode> tag
This field is used to set the UDP/IP mode.
Tag name
udpMode

<udpAddress> tag
This field is used to set the UDP/IP destination address.
Tag name
udpAddress

<udpSourcePort> tag
This field is used to set the UDP/IP source port.
Tag name
udpSourcePort

<udpDestPort> tag
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
String Primary,
Secondary
Type Possible values
String Chapter4,
IEEE1588,
ERTC
Type Possible values
String None,
8bits,
16bits,
32bits
Type Possible values
String 16bits,
32bits
Type Possible values
String Throughput
Type Possible values
String Unicast,
Multicast
Type Possible values
String xxx.xxx.xxx.xxx
(xxx : 0 to 255)
Type Possible values
Integer 0 to 65535
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104047
Is.Rev 08
Previous Ref.: -
Date: 21/06/2021
Primary
Default value
Chapter4
Default value
32bits
Default value
32bits
Default value
Throughput
Default value
Multicast
Default value
239.255.11.10
Default value
10001
Safran Data Systems
.
Page 128