7.6.4.2
Combiner setup
On both receivers, the Post D combiner inputs are configured as follow:
Input 1 Master pre D
Input 2 Slave pre D
On the example, here above, the input of the Bit-sync n°2 is connected to the Ext Post D output.
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
08
Previous Ref.:
-
Date:
21/06/2021
Safran Data Systems
.
Page 106