Safran RX-1 User Manual page 129

This field is used to set the UDP/IP destination port.
Tag name
udpDestPort

<udpSourceInterface> tag
This field is used to set the UDP/IP source interface (if value is 0.0.0.0, interface will be automatically
chosen by the operating system).
Tag name
udpSourceInterface String
Note: The adapter address can be set in administrator mode and then set in the xml file to force the
output on a specific adapter.

<udpTimeToLive> tag
This field is used to set the Time To Live value of each UDP frame.
Tag name
udpTimeToLive

<tPacketSent> tag
This field is used to enable or disable the sending of Time Packets.
Tag name
tPacketSent

<tPacketChannelId> tag
This field is used to fill the Channel ID field of the UDP Time Packet Header.
Tag name
tPacketChannelId

<tPacketDateFormat> tag
This field is used to fill the bit 9 of the Time Packet Channel-Specific Data of the UDP Time Packet
Body.
Tag name
tPacketDateFormat

<tPacketTimeFormat> tag
This field is used to fill the bits 4 to 7 of the Time Packet Channel-Specific Data of the UDP Time
Packet Body
Tag name
tPacketTimeFormat String

<endianness> tag
This field is used to set the ordering of bytes of a word of PCM data field.
Tag name
endianness
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Type Possible values
Integer 0 to 65535
Type Possible values
xxx.xxx.xxx.xxx
(xxx : 0 to 255)
Type Possible values
Integer 1 to 5
Type Possible values
String Disabled,
Enabled
Type Possible values
Integer 1 to 65535
Type Possible values
String IRIG, MandY
Type Possible values
IRIG-B
Type Possible values
String BigEndian,
LittleEndian
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref. D104047
Is.Rev 08
Previous Ref.: -
Date: 21/06/2021
Default value
0
Default value
0.0.0.0
Default value
2
Default value
Disabled
Default value
1
Default value
IRIG
Default value
IRIG-B
Default value
LittleEndian
Safran Data Systems
.
Page 129