Table of Contents
Advertisement
5.3.3
Preset Configuration Sub-Menu
The Preset Configuration SubMenu gives access to memory slots with full receiver configurations that can
be saved and recalled by the operator. The maximum number of configurations is 10.
Configurations whose name is only a dash "-" are empty. Other configurations consist of full receiver settings.
When selecting an empty configuration, a prompt window will open to request a name before saving the current
parameters in this memory slot.
When selecting a full configuration, a prompt window will open to ask for loading the settings, or saving the
current parameters on this memory slot (overwriting the former content if any), or delete the content.
Notes:
Each Preset configuration correspond to a CTX file stored in the following drive :
The default CTX file used during boot up sequence is located in :
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
Figure 29: RX-1 Preset Menu
D:\ZDS\Data\rtrnt\CTXDocument1
D:\ZDS\Data\cortex\cortex-nt.ctx
Ref.
Is.Rev
Previous Ref.:
Date:
Safran Data Systems
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
D104047
08
-
21/06/2021
.
Page 67
Advertisement
Table of Contents
