Safran RX-1 User Manual page 23

Compact operational receiver
Hide thumbs Also See for RX-1:
Table of Contents

Advertisement

P
ARAMETER
AM outputs
Analog AGC outputs
Additional outputs
IF and AGC playback
Embedded Bit Error Rate (BER)
Tester
IF Spectrum display
Eye Diagram display
Constellation display
(for digital modulations)
Viewers
Remote interface
Graphical User Interface
© Safran Data Systems – IMP000074 e14r1
RX-1 Compact Operational Receiver
User's Manual
3 x BNC outputs (Ch1, Ch2, Comb)
Output voltage configurable (2Vpp into 75 Ω for 50% modulation for
Adjustable time delay (30µs to 200µs)
NEW FEATURE: AM is regenerated, so it is compatible with a AGC time
3 x BNC outputs (Ch1, Ch2, Comb)
NEW FEATURE: No need to increase the Time Constant to keep AM.
2 x IF outputs (to the IF recorder Cortex RSR for example)
RX-1 can select external AGC and IF 70MHz signals and provide pre-d
Gives the operator the capability to perform an open loop BER test
3 independent per receiver (CH1, CH2, Comb)
Simultaneous display while demodulating
3 independent per receiver (CH1, CH2, Comb)
Simultaneous display while demodulating
3 independent per receiver (CH1, CH2, Comb)
Simultaneous display while demodulating
Individual plotters for AGC value (Ch1, Ch2) in time, IF spectrum and Eye
Recording possible as excel file and Jpeg file
Display is done on a remote computer connected thru IP
2 Ethernet ports to be used for remote monitoring and control, especially to
get access to the full settings of the receiver, as well as real time telemetry
data on Ethernet. UDP or TCP-IP protocols available
ICD document and Ethernet format description provided.
Basic access thru the front panel screens and pushbuttons
Full access versatile & user-friendly based on a web browser from a remote
This document is the property of
It cannot be duplicated or distributed without expressed written consent.
Ref.
D104047
Is.Rev
Previous Ref.:
Date:
21/06/2021
S
PECIFICATIONS
example)
constant of 0.1ms
Slope or coordinate mode
Adjustable voltage (±5V max)
A value of 0.1ms is recommended
1 x reconstructed IF (unlimited)
Digital AGC's
TTL status
2 x Ethernet sockets
combining during playback mode.
diagram
Cursors and markers capability
computer
Safran Data Systems
08
-
.
Page 23

Advertisement

Table of Contents
loading

Table of Contents